6.5 Grendel Unprimed Rifle Brass 50 Count
CHOOSE THE 6.5 GRENDEL RIFLE BRASS THAT’S RIGHT FOR YOU
Midsouth Shooters knows it all starts with the right Rifle Brass. Check out our current selection of 6.5 Grendel Rifle Brass At Optics Ammunition Shop
93 in stock
Buy Hornady 6.5 Grendel Unprimed Rifle Brass 50 Count
Hornady 6.5 Grendel Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Hornady Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Hornady for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Hornady 6.5 Grendel Brass
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
Hornady Brass Features:
- Tight Wall Concentricity – Concentricity helps to ensure proper bullet seating in both the case and the chamber of your firearm. Higher concentricity also aids in a uniform release of the bullet on firing, for optimal velocity and accuracy.
- Uniform Case Wall Thickness – Benchrest shooters have long known that uniform case wall thickness is vital to accuracy. We manufacture to extremely tight tolerances to ensure this critical element is as consistent as possible.
- More Reloads per Case – Hornady brass is treated as the foundation for an accurate cartridge, not a commodity. Because they take greater care in its creation, you’ll get more reloads from Hornady brass.
- Consistent Weight and Capacity – Every single Hornady case, regardless of the lot in which it was produced, is virtually identical to other Hornady cases in the same caliber. For you, this means consistent pressures, velocity and accuracy — every time.
Only logged in customers who have purchased this product may leave a review.